Metadata for ponyprog in main

---
Type: desktop-application
ID: ponyprog.desktop
Package: ponyprog
Name:
  C: Ponyprog
Summary:
  C: EEPROM and microcontroller flasher
Description:
  C: >-
    <p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows and Linux.
    It&apos;s purpose is reading and writing every serial device. With PonyProg and SI-Prog you can program Wafercard for
    SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.</p>

    <p>PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506
    eeprom family chips.</p>

    <p>You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them to uC or PIC. You can even backup the old program
    on the chip using PonyProg. PonyProg enables the user to write, verify and erase data on the microchip.</p>

    <p>Also setting fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file or eep file, BIN
    file to HEX file or MOT file and vice versa so you can use PonyProg as converter too. PonyProg offers serial or parallel
    port programming for uC&apos;s. You can even change polarity of control lines without touching the wires using I/O port
    setup.</p>

    <p>Using PonyProg together with generic USB2serial based on FTDI adapters will work. There are plans on upstream to use
    libusb to add more USB2serial based functionality.</p>
  en: >-
    <p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows and Linux.
    It&apos;s purpose is reading and writing every serial device. With PonyProg and SI-Prog you can program Wafercard for
    SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.</p>

    <p>PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506
    eeprom family chips.</p>

    <p>You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them to uC or PIC. You can even backup the old program
    on the chip using PonyProg. PonyProg enables the user to write, verify and erase data on the microchip.</p>

    <p>Also setting fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file or eep file, BIN
    file to HEX file or MOT file and vice versa so you can use PonyProg as converter too. PonyProg offers serial or parallel
    port programming for uC&apos;s. You can even change polarity of control lines without touching the wires using I/O port
    setup.</p>

    <p>Using PonyProg together with generic USB2serial based on FTDI adapters will work. There are plans on upstream to use
    libusb to add more USB2serial based functionality.</p>
Categories:
- Utility
Keywords:
  C:
  - Electronics,Eeprom
Icon:
  cached:
  - name: ponyprog_ponyprog.png
    width: 48
    height: 48
  - name: ponyprog_ponyprog.png
    width: 64
    height: 64
  - name: ponyprog_ponyprog.png
    width: 128
    height: 128
  remote:
  - url: p/po/ponyprog.desktop/07e89e9968988f2a96de68d40ee60925/icons/128x128/ponyprog_ponyprog.png
    width: 128
    height: 128
  stock: ponyprog
Launchable:
  desktop-id:
  - ponyprog.desktop